Ferflex® rounded magnetic wallpaper kit -2mx28cm

Directions for use: 

Do not apply over new paint. If you have just repainted your wall, allow some time before applying Ferflex® (between 4 and 6 months). Some solvents in paints can alter the power of our adhesive 

How to position your magnetic wallpaper :

Before the installation, check that the surface of your wall is smooth and healthy.
On 5 centimeters, remove the self-adhesive sheet from the adhesive starting from the top and position your wallpaper.
Make sure that you are aligned and then gently remove the rest of the protection of the adhesive.
Remember to keep this protection to be able to store your repositionable wallpaper in case of moving for example. Only for wallpapers with a repositionable adhesive.

Voir démonstration : Ici<

Tips : 

You can cut it with a cutter or a scissor that cuts perfectly.
To clean your magnetic wallpaper: use a microfiber or a soft cloth barely damp.
You can write and draw on your Ferflex® magnetic wallpaper with a liquid chalk marker or a Woody Stabilo 3 in 1 pencil available on our site.

To remove the pictures from your wall : 

• To remove your wallpaper from the wall, start from the top and pull very gently downwards.
• Do you have a magnetic wallpaper with a repositionable adhesive? To reuse it later, you need to keep the protective film of the adhesive to stick the wallpaper strip back on and store it away from dust.

The advantages of our magnetic wallpaper Ferflex :

It is sold with accessories for immediate use.

No need for glue. It is fixed with an adhesive.

Installation is quick and easy.

You can paint your wallpaper with a multi-support paint.

Its magnetic power will not be altered

It can be cut with a scissor or a cutter.